Mild Steel Kiosk – 1250mm x 750mm x 400mm Kiosk – Single Door (MSK 1)
£480.00 Ex VAT (£576.00 Inc VAT)
Mild Steel Kiosk designed to protect electrical equipment to be used in tandem with high voltage and expensive equipment.
Commonly in our industry the kiosks are used to house larger air pump and associated electrical equipment (control panel or alarms) for sewage treatment plants and pumping stations.
Supplied with triangular locks and key.
Kiosk measurements
1250 mm Height
750 mm Width
400 mm Depth
Free Delivery To Mainland England & Wales.
Please allow 2-5 working days for delivery.
2 in stock
The kiosks are manufactured from 2mm zintec sheet steel to BS6687-1986 (chromate washed substrate BS1449-2.5 microns)
The kiosks are press formed and welded construction and are supported by the appropriate certification to IP55 of BS5490 to give excellent weather protection and good earth continuity and finished to the following paint specification
-
- Degrease and clean to remove surface dirt
- 1-coat of 2-pack etching primer
- Air dry for 1-hour
- 2-coats of pure polyester powder paint to give a minimum dry film thickness of 50 microns
- Stove at 180 degrees for 15 minutes
-
- 2-kiosks lifting brackets
- 14mm floor fixing
- 18mm plywood backboard
- Door retaining stay to hold door open at 90 degrees
- Flush 7mm triangular door locks
- Full height mounting rails at the rear of each section
- Internal hinges
- Earthing Points
Please note: The kiosk supplied may slightly differ from the one pictured.
Kiosk measurements are in Height x Width x Depth (mm)
| Weight | 50 kg |
|---|---|
| Dimensions | 75 × 40 × 125 cm |
| Product Code | MSK1 |
Related products
Accessories
Accessories
Accessories